 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| IP9009 5-CH Motor Drive IC with Regulator and Reset controllers DESCRIPTIONS IP9009 is a 5-CH motor driver with LDO regulator and reset controller. It is suitable for CD-P/VCD-P/DVD-P systems. The motor driver part is composed of four BTL drivers and one forward/reverse controlled DC motor driver. 28SSOPH-375B FEATURES - 4-CH BTL driver. - 1-CH forward/reverse controlled DC motor driver. - Built-in adjustable LDO regulator controller. - Built-in reset controller. - Built-in TSD (thermal shut down) circuit. - Built-in mute circuit. - Built-in power save circuit. ORDER INFORMATION Device IP9009 IP9009-TF IP9009L IP9009L-TF IP9009 Package 28SSOPH-375A 28SSOPH-375A 28SSOPH-375A 28SSOPH-375A 28SSOPH-375B 28SSOPH-375B 28SSOPH-375B 28SSOPH-375B Operating Temp -35OC ~ +85OC -35OC ~ +85OC -35OC ~ +85OC -35OC ~ +85OC -35OC ~ +85OC -35OC ~ +85OC -35OC ~ +85OC -35OC ~ +85OC * L : Lead Free * TF : Tape & Reel packing * L-TF : Lead Free and Tape & Reel packing IP9009-TF IP9009L IP9009L-TF June. 2005 (Rev. 3) www.interpionsemi.com -1- IP9009 5-CH Motor Drive IC with Regulator and Reset controllers PIN CONNECTIONS PIN DESCRIPTIONS NO SYMBOL I/O 1 2 3 4 5 6 7 8 9 10 11 12 13 14 FWD REV CTL PS IN1 IN2 SVCC PVCC1 VOLVOL+ VO2VO2+ VO1VO1+ I I I I I I O O O O O O DESCRIPTION Loading motor forward input Loading motor reverse input Loading motor speed control Power save CH1 input CH2 input Signal power supply Power supply 1 Loading driver output(-) Loading driver output(+) CH2 driver output(-) CH2 driver output(+) CH1 driver output(-) CH1 driver output(+) NO SYMBOL 15 16 17 18 19 20 21 22 23 24 25 26 27 28 VO4+ VO4VO3+ VO3GND PVCC2 MUTE IN3 IN4 Vdet Reset REOadj REBadj BIAS I/O O O O O I I I I O O O I DESCRIPTION CH4 driver output(+) CH4 driver output(-) CH3 driver output(+) CH3 driver output(-) Ground Power supply 2 Mute CH3 input CH4 input Reset controller input Reset controller output Adjustable regulator feedback Adjustable regulator control Bias June. 2005 (Rev. 3) www.interpionsemi.com -2- IP9009 5-CH Motor Drive IC with Regulator and Reset controllers ABSOLUTE MAXIMUM RATINGS CHARACTERISTICS Maximum supply voltage Power dissipation Operating temperature Storage temperature SYMBOL VCCmax Pd Topr Tstg VALUE 15 2.3 * -35 ~ +85 -55 ~ 150 UNIT V W O C C O Note> 1. When mounted on 50mm X 50mm X 1mm PCB (Phenolic resin material). 2. Power dissipation reduces 18.4 mW/OC for using above Ta=25OC 3. Do not exceed Pd and SOA. POWER DISSIPATION CURVE 3 2 1 Power Dissipation (mW) 0 25 50 75 100 125 150 175 Ambient Temperature (C) RECOMMENDED OPERATING CONDITIONS CHARACTERISTICS Signal supply Voltage Power supply Voltage 1 Power supply Voltage 2 SYMBOL SVCC PVCC1 PVCC2 VALUE 4.3 ~ 13.2 4.3 ~ SVCC 4.3 ~ SVCC UNIT V V V June. 2005 (Rev. 3) www.interpionsemi.com -3- IP9009 5-CH Motor Drive IC with Regulator and Reset controllers ELECTRICAL CHARACTERISTICS (SVCC=12.0V,PVCC1=PVCC2=5V, RL=12ohm, Bias=1.65V, Ta = 25OC unless otherwise specified.) CHARACTERISTICS Quiescent circuit current Power save on current Power save on voltage Power save off voltage SYMBOL CONDITIONS Icc Ips Vpson Vpsoff No Load Pin5=GND Pin5=sweep Pin5=sweep MIN 2.0 TYP 20 0.5 MAX 30 2.0 0.5 UNIT mA mA V V [ ADJUSTABLE REGULATOR PART ] Output voltage Load Regulation Line Regulation [ RESET CONTROLLER PART ] VREG Vom Vcc IL=100mA IL=0->200mA Vcc=6->10V,IL=100mA Vout* 0.95 -50 -50 Vout 0 0 Vout* 1.05 50 50 V mV mV Detecting voltage Hysteresis voltage Maximum output sink current Output saturation voltage [ BTL DRIVE PART ] Vdet Vdet Isink Vsat Pin24=sweep (low->high) 2.6 3 2.9 50 6 - 3.2 0.4 V mV mA V RL=1k ohm - Output offset voltage Maximum output voltage Closed-loop voltage gain Mute on voltage Mute off voltage Mute pin current Bias pin current Voos Voms Avfs Vmon Vmoff Imp Ibias Vin=Vref -100 3.6 4.0 19 200 80 +100 21 0.5 300 120 mV V dB V V uA uA Vin=0.1Vrms, f=1kHz Pin21=sweep Pin21=sweep Pin21=5.0V Pin28=2.5V 17 1.5 June. 2005 (Rev. 3) www.interpionsemi.com -4- IP9009 5-CH Motor Drive IC with Regulator and Reset controllers ELECTRICAL CHARACTERISTICS (SVCC=12.0V,PVCC1=PVCC2=5V, RL=12ohm, Bias=1.65V, Ta = 25OC unless otherwise specified.) CHARACTERISTICS [ LOADING DRIVER PART ] SYMBOL CONDITIONS MIN TYP MAX UNIT Input high level voltage Input low level voltage FWD/REV pin current Maximum output voltage Voltage gain Vih Vil Iin Vo Gvf Pin1=Pin2=5.0V RL=25 ohm Pin3=sweep 1.5 9.0 7 200 10 9 0.5 300 11 V V uA V dB June. 2005 (Rev. 3) www.interpionsemi.com -5- IP9009 5-CH Motor Drive IC with Regulator and Reset controllers TYPICAL APPLICATION CIRCUIT June. 2005 (Rev. 3) www.interpionsemi.com -6- IP9009 5-CH Motor Drive IC with Regulator and Reset controllers PACKAGE DIMENSION(28SSOPH-375A) June. 2005 (Rev. 3) www.interpionsemi.com -7- IP9009 5-CH Motor Drive IC with Regulator and Reset controllers PACKAGE DIMENSION(28SSOPH-375B) June. 2005 (Rev. 3) www.interpionsemi.com -8- |
Price & Availability of IP9009
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |